-
Double T-Bar Roll-up grille
Top view and profile section Standard: 17 mm distances between bars, 13 mm pitch. Distances made of black PVC.
Option: PCV Spacing available in the following colours:
- grey,
- beige,
- light brown,
- dark brown.
The maximum length of a single piece of grille is 6000mm.
The grille is considered as the additional part, so, it should be considered as a separate order position.
Type of grille Colour Order Code Double T-Bar Roll-up grille (natural aluminium) Natural aluminium ZDW-1,8/B/L Double T-Bar Roll-up grille (anodized aluminium) Satin ZADWS-1,8/B/L Anodized steel ZADWST-1,8/B/L Anodized gold ZADWZ-1,8/B/L Anodized black ZADWC-1,8/B/L B-width of the unit, L- lenght of the grille
Double T-Bar Roll-up aluminium grilles
-
Roll-up wooden grille
Top view and profile section The grille is made of natural wood.
Standard: Spacings (sleeves) of the length 13mm between the rungs are made of black PVC.
Option: Spacings (sleeves) are also available in colors:
- gray,
- beige,
- light brown,
- dark brown.
All those spacings (sleeves) are available in non standard colours displayed above and standard length of 17mm
Wooden spacings (sleeves) are also available (beech unvarnished) of the length 17mm.
The maximum length of a single piece of grille is 6000mm.
The grille is considered as the additional part, so, it should be considered as a separate order position.
Type of grille Colour Order Code Roll-up wooden grille Oak ZD-1,8/B/L Ash ZJ-1,8/B/L Beech ZB-1,8/B/L Sapeli ZS-1,8/B/L B-width of the unit, L- lenght of the grille
-
Roll-up aluminium grille profile closed
Top view and profile Roll-up grille profile closed made of aluminium.
The grille is available in the following variants:
- natural aluminium,
- anodized aluminium,
- aluminium - wood effect coating.
Standard: Spacings (sleeves) of the length 13mm between the rungs are made of black PVC.
Option: Spacings (sleeves) are also available in colors:
- gray,
- beige,
- light brown,
- dark brown.
All those spacings (sleeves) are available in non standard colours displayed above and standard length of 17mm.
The maximum length of a single piece of grille is 6000mm .
The grille is considered as the additional part, so, it should be considered as a separate order position.
Type of grille Colour Order Code Roll-up aluminium grille profile closed - natural aluminium Natural aluminium ZAL-1,8/B/L Roll-up aluminium grille profile closed - anodized aluminium Anodized aluminium satin ZAALS-1,8/B/L Anodized aluminium steel ZAALST-1,8/B/L B-width of the unit, L- lenght of the grille
Roll-up aluminium grille profile closed
-
Modular aluminium grille
Top view and profile section Modular grille made of aluminium.
The grille is available in two versions:
- natural aluminium,
- anodised aluminium.
The grilles joints are from black PCV only.
The grille is considered as the additional part, so, it should be considered as a separate order position.
Type of grille Colour Order Code Modular grille – natural aluminium Natural aluminium MPZ-1,8/B/L Modular grille – anodised aluminium Satin MPZAS-1,8/B/L Anodized steel MPZAST-1,8/B/L B-width of the unit, L- lenght of the grille
Aluminium Modular Grilles
-
Linear aluminium grille
Top view and profile section This specific grille has been entirely made of aluminium – snap on profile.
The grille is available in the following variants:
- natural aluminium (cross – bar joiners are spray coated in RAL 9005 black colour),
- Any RAL colour coated aluminium (the grille is entirely covered in one colour),
- Anodised aluminium (cross bar joiners are coated in RAL 9005 black colour).
The grille is considered as the additional part, so, it should be considered as a separate order position.
Type of grille Colour Order code Aluminium linear grille snap on profile natural aluminium Natural aluminium PZW-1,8/B/L Aluminium linear grille snap on profile anodised aluminium Satin PZWAS-1,8/B/L Anodized steel PZWAST-1,8/B/L Linear bar aluminium grille, RAL colour coated aluminium Any from RAL colours range PZWR-1,8/B/L B - width of the unit, L - lenght of the grille
Linear aluminium grilles
-
Linear stainless steel grille
Top view and profile section The grille is available only as a rigid version.
The maximum length of one section of the grille is 2000 mm.
Grille length longer than 2000 mm are made of several elements of equal lengths.
The grille is considered as the additional part, so, it should be considered as a separate order position.
Type of grille Colour Order Code Linear stainless steel grille Stainless steel SN-1,8/B/L B - width of the unit, L - lenght of the grille
Linear stainless steel grille
-
Grille corner
The frame itself is the exclusive component
for CVK2, CVK4, CVK2P, CVK4P Climaconvectors and VKN5P trench heater.
Set of frames for trench heaters and climaconvectors
Note: In case of ordering VK15 and VKN trench heaters and due to the differences between the construction of the trench heater unit with the frame and without the frame, any frame element should be ordered as the additional part alongside the ordering the trench heater unit itself.
Frame is available in the following variants:
- natural aluminium,
- anodised aluminium,
- spray coated aluminium.
The details for the frame set


Way of assembly the frame set
The set of aluminium frames type L and F is considered as the masking element between the floor surface and trench heater casing. Any frame element is delivered self-assembly format. The frame set should be attached to the trench heating casing by using the silicon glue. Verano as manufacturer is not responsible for any issues connected with the assembly defects and faults that reflect on the product performance, specifically for any issues connected with changing original shape of the trench heating casing.


-
Controller VER-8S WiFi
The controller dedicated to the natural convection trench heaters.
DEDICATED TO:
- natural convection trench heaters VK15, wall- and floor-mounted convector, COMODO heating bench
AVAILABLE FUNCTIONS:
- max control of 8 different zones
- each zone can be assigned its own individual operating model (constant temperature, time limit or 6 different work schedules)
- possibility of connecting peripheral wireless devices
- possibility of control via the eModul mobile application
- possibility of software update capability via USB port.
FEATURES OF CONTROLLER:
- wireless control (built-in WiFi module)
- power supply installed in electric box Ø60 mm
- NO/NC relay output (e.g. for controlling the heater which is switched on as required to heat the room)
- wireless room air temperature sensor included
- supplied by 230 V AC
(5V power supply installed in electric cupboard included)
-
Controller VER-15S
This specific controller is dedicated to natural convection trench heaters coming with 230V AC Actuators.
Functions of the controller:
- Adjusting and controlling the room temperature,
- Programming schedule for a week
- Manual programme
- Programme for day/night
- Optimum Start Function
Equipment of the controller:
- Instant screen light
- 3mm thick glazed front panel
- Build in room temperature sensor
- 2xAA 1.5V batteries
Operation principle
Room temperature controller VER15S type is directed to control the natural convection trench heater water flow through the actuator valve.
The role of the controller is to keep the demanded temperature in the room, by sending to on/off actuator that results opening or closing the valve.
The manual and drawing for VER15S controller connection to the system, with using NC actuator i.e. Verano VERSST230 REMARK!
Any notifications from the back side of the controller cover refer to the build in receiver. Notifications do not refer to the connected actuator.
-
Controller VER-16S WiFi
The controller dedicated to the natural convection trench heaters.
DEDICATED TO:
- natural convection trench heaters VK15, wall- and floor-mounted convector, COMODO heating bench,
AVAILABLE FUNCTIONS:
- max control of 16 different zones
- each zone can be assigned its own individual operating model (constant temperature, time limit or 6 different work schedules)
- possibility of connecting peripheral wireless devices
- possibility of control via the eModul mobile application
- possibility of software update capability via USB port
FEATURES OF CONTROLLER:
- 2mm thick glass front panel
- wireless control (built-in WiFi module)
- flush mounting in electric box (Ø60 mm)
- built-in temperature sensor
- supplied by 230 V AC
- available in white or black colour
-
Controller VER-24
This controller is dedicated to the VKN1 and VKN5 fan assisted trench heaters as well as to CVK2 and CVK2P two pipes Climaconvectors that are also equipped with 24V DC actuators
Room temperature controller in white colour (VER-24 White) DEDICATED TO:
- fan assisted heaters
- 2-pipe climaconvectors (heating and cooling units)
AVAILABLE FUNCTIONS:
- room temperature control - heating and cooling
- operating mode: comfort, economy and protect
- manual or weekly operating mode
FEATURES OF CONTROLLER:
- color touchscreen
- available in white (standard) or black colour
- 2 mm thick glass front panel
- flush mounting in electric box (Ø60 mm)
- control output of the 2-position actuator (ON/OFF) type NC and NO
- control output of the 0-10 V DC actuator
- 0-10 V DC output signal to control EC fan
- built-in temperature sensor
- supplied by 24 V DC
The VER-24 controller controls the operation of fans and actuators mounted on thermostatic valves to maintain the set temperature in the room.
Depending on the selected mode, it increases or decreases the room temperature.The controller enables manual or automatic, smooth regulation of fan operation (depending on the demand, gradually increasing or decreasing its rotation) by means of a 0-10 V DC signal.
The actuator control is based on: - an on-off for the 2-position actuator, for example NC type - a 0-10 V DC signal (an actuator with the possibility of smooth regulation is required).
The controller is supplied by 24 V DC. The VER-24 controller is designed for wall mounting.
- Current supply 24V.
- Fan controlled by the signal 0-10V.
- Actuator controlled by the signal 0-10V.
- NC Actuator.
-
Controller VER-24S
This controller is dedicated to the VKN1 and VKN5 fan assisted trench heaters as well as to CVK2 and CVK2P two pipes Climaconvectors that are also equipped with 24V DC actuators.
Room temperature controller VER-24S DEDICATED TO:
- fan assisted heaters
- 2-pipe climaconvectors (heating and cooling units)
AVAILABLE FUNCTIONS:
- room temperature control - heating and cooling
- operating mode: comfort, economy and protect
- manual or weekly operating mode
FEATURES OF CONTROLLER:
- available in white colour
- 2 mm thick glass front panel
- flush mounting in electric box (Ø60 mm)
- control output of the 2-position actuator (ON/OFF) type NC and NO
- control output of the 0-10 V DC actuator
- 0-10 V DC output signal to control EC fan
- built-in temperature sensor
- supplied by 24 V DC
The VER-24S controller controls the operation of fans and actuators mounted on thermostatic valves to maintain the set temperature in the room. Depending on the selected mode, it increases or decreases the room temperature.
The controller enables manual or automatic, smooth regulation of fan operation (depending on the demand, gradually increasing or decreasing its rotation) by means of a 0-10 V DC signal.
The actuator control is based on: - an on-off for the 2-position actuator, for example NC type - a 0-10 V DC signal (an actuator with the possibility of smooth regulation is required).
The controller is supplied by 24 V DC.
The VER-24S controller is designed for wall mounting.- Current supply 24V.
- Fan controlled by the signal 0-10V.
- Actuator controlled by the signal 0-10V.
- NC Actuator.
-
Controller VER-24 WiFi
This controller is dedicated to the VKN1 and VKN5 fan assisted trench heaters as well as to CVK2 and CVK2P two pipes Climaconvectors that are also equipped with 24V DC actuators
DEDICATED TO:
- fan assisted heaters
- 2-pipe climaconvectors (heating and cooling units)
AVAILABLE FUNCTIONS:
- room temperature control - heating and cooling
- operating mode: comfort, economy and protect
- manual or weekly operating mode
FEATURES OF CONTROLLER:
- WiFi connectivity - control via the eModul mobile application
- color touchscreen
- available in white (standard) or black colour
- 2 mm thick glass front panel
- flush mounting in electric box (Ø60 mm)
- control output of the 2-position actuator (ON/OFF) type NC and NO
- control output of the 0-10 V DC actuator
- 0-10 V DC output signal to control EC fan
- built-in temperature sensor
- supplied by 24 V DC
The VER-24 WiFI controller controls the operation of fans and actuators mounted on thermostatic valves to maintain the set temperature in the room. Depending on the selected mode, it increases or decreases the room temperature.
The controller enables manual or automatic, smooth regulation of fan operation (depending on the demand, gradually increasing or decreasing its rotation) by means of a 0-10 V DC signal.
The actuator control is based on: - an on-off for the 2-position actuator, for example NC type - a 0-10 V DC signal (an actuator with the possibility of smooth regulation is required).
The controller is supplied by 24 V DC.
The VER-24 WiFi controller is designed for wall mounting.- Current supply 24V.
- Fan controlled by the signal 0-10V.
- Actuator controlled by the signal 0-10V.
- NC Actuator.
-
Controller VER-34
The controller is dedicated to wall and floor mounted LST convectors Caliente that are equipped with 24DC actuator valves.
VER-34 CONTROLLER TECHNICAL DETAILS:
- Large, clear LED display.
- Built in temperature sensor.
- Hard touch buttons.
- Front panel made of glass.
- Automatic brightness adjustement on the base of built in light sensor.
THIS CONTROLLER IS ONLY AVAILABLE IN THE SET:
- Room temperature controller.
- Full glazed masking flap.
- VERSST24 Actuator.
- This controller is suitable for Caliente type units only:
- Wall mounted.
- Floor mounted – of the hight minimum 160mm and more.
- The regulator is attached always from the right side of the unit.
VER-34 Controller will keep the adjusted temperature in the room, while releasing the shutdown signal to the valve being attached to the unit. The current room ambient temperature is being displayed on the screen.
The controller is attached always on the right side of the unit.
Regulator wymaga zasilania 24V DC.
The controller should be considered as the integral part of the unit and therefore it has to be included in the order when required.
- Current electric connection 24V DC
- NC Actuator
-
Controller VER-44 WiFi
The controllers dedicated to the CVK4 four-pipe Climaconvectors.
DEDICATED TO:
- fan assisted heaters
- 2-pipe and 4-pipe climaconvectors (heating and cooling units)
AVAILABLE FUNCTIONS:
- room temperature control - heating and cooling
- operating mode: comfort, economy and protect
- manual or weekly operating mode
FEATURES OF CONTROLLER:
- WiFi connectivity - control via the eModul mobile application
- color touchscreen
- available in white (standard) or black colour
- 2 mm thick glass front panel
- exposed wall mounting
- control output of the 2-position actuator (ON/OFF) type NC and NO
- control output of the 0-10 V DC actuator
- 0-10 V DC output signal to control EC fan
- built-in temperature sensor
- supplied by 24 V DC
The VER-44 WiFi controller controls the operation of fans and actuators mounted on thermostatic valves to maintain the set temperature in the room. Depending on the selected mode, it increases or decreases the room temperature.
The controller enables manual or automatic, smooth regulation of fan operation (depending on the demand, gradually increasing or decreasing its rotation) by means of a 0-10 V DC signal.
The actuator control is based on: - an on-off for the 2-position actuator, for example NC type - a 0-10 V DC signal (an actuator with the possibility of smooth regulation is required).
The controller is supplied by 24 V DC.
The VER-44 WiFi controller is designed for wall mounting.
-
Controller SIEMENS RDG160T
Controllers that are dedicated to CVK2 two-pipe Climaconvectors and CVK4 four-pipe Climaconvectors that are fitted with 0-10 V DC actuators.
THE SIEMENS RDG161T CONTROLLER CHARACTERISTICS:
- current supply 24V AC/DC,
- controlling output 0-10 V DC,
- controlling output 0-10 V DC for ECM (electronically commutable) fan motor,
- automatic or manual switch over for heating/cooling,
- fan speeds adjusted manually or automatically,
- with the display,
- for on-the-wall assembly,
- built-in the temperature sensor.
-
Thermostatic heads Siemens and Heimer - for VK15 trench heaters
Thermostatic valve with remote control setpoint
type Siemens RTN 81.Remote setting element
with 2m long capilar.Thermostatic valve with remote control setpoint
2805-00.500 IMI HEIMEIER.Remote setting element
with 2m long capilar. -
Thermostatic heads Schlösser - for Wall and Floor mounted heaters
All TVR that have connection thread M30x1.5 are suitable for all Schlosser valves, as well as with valves of any other manufacturer that have M30x1.5 connection and shut off size 11.5mm
Thermostatic head SH Diamant White
Cat. No. 600100001Thermostatic head SH Diamant Plus White-Chrome
Cat. No. 600100011Thermostatic head SH Brillant White-Chrome
Cat. No. 600200001Thermostatic head SH Brillant White
Cat. No. 600200002Thermostatic head SH Brillant Chrome
Cat. No. 600200003Thermostatic head SH Brillant Satin
Cat. No. 600200004Thermostatic head SH Brillant Steel
Cat. No. 600200005Thermostatic head SH Brillant Gold
Cat. No. 600200007
-
Actuator VERSST24
Thermoelectrical actuating valve that is directed to controlling the water flow, coming together with the thread M30X1,5.
Type of the motor NC = normally closed Current 24V AC / DC , +20%...-10% (0 Hz – 60 Hz) Power consumption 24V: 2,0 W Cranking Current 24V: < 200 mA Current consumption 83 mA at 24V Opening/closing time max. 200sec Max skip 4,5 mm Ambient Temperature max. 60 °C Protection level IP 54 / II Type of wire PVC, 2 * 0,75 mm , length 1 m, RAL 9003 Thread M 30X1,5 Assembly 360°, it keeps IP 54 -
Actuator VERSST230
Thermo electrical actuator that is directed to control for heating and cooling water fuelled units, that has a threat of M30X1,5.
Type of the motor NC = normally closed Current 230V AC, +10%.....-10% (50 Hz - 60 Hz) Power consumption 230V: 2,0 W Cranking current 230V: Current consumption 9 mA at 230V Opening/closing time max. 200sec Max skip 4,5 mm Ambient temperaturę max. 60 °C Protection level IP 54 / II Connection wire PVC, 2 * 0,75 mm , length 1 m, RAL 9003 Thread M 30X1,5 Assembly 360°, it keeps IP 54
-
Return valves DN 10
Straight return valve
type Siemens ADN 10Valve diameter 10 DN
Straight return valve
type Schlösser 601300003Valve diameter 10 DN
Angular return valve
type Siemens AEN 10Valve diameter 10 DN
Angular return valve
type Schlösser 601300001Valve diameter 10 DN
-
Return valves DN 15
Straight return valve
type Siemens ADN 215Valve diameter 15 DN
Straight return valve
type Schlösser 601300004Valve diameter 15 DN
Angular return valve
type Siemens AEN15Valve diameter 15 DN
Angular return valve
type Schlösser 601300002Valve diameter 15 DN
-
Thermostatic valves for trench heaters VKN1
Straight thermostatic valve
type Siemens VDN 210Valve diameter 10 DN
Straight thermostatic valve
type Schlösser 601200001Valve diameter 10 DN
Angular thermostatic valve type Siemens VEN 210
Valve diameter 10 DN
Angular thermostatic valve
type Schlösser 601200002Valve diameter 10 DN
-
Thermostatic valves for VK15 / VKN5 / CVK / Wall mounted / Floor mounted / Comodo heaters
Straight thermostatic valve
type Siemens VDN 215Valve diameter 15 DN
Straight thermostatic valve
type Schlösser 601200004Valve diameter 15 DN
Angular thermostatic valve
type Siemens VEN 215Valve diameter 15 DN
Angular thermostatic valve
type Schlösser 601200005Valve diameter 15 DN

Input voltage 100-240V AC,
Input frequency 50-60Hz,
Output voltage 24V DC,
Max output current 1,25A,
Dimensions 91x53x55,6 mm.

Input voltage 100-240V AC,
Input frequency 50-60Hz,
Output voltage 24V DC,
Max output current 2,5A,
Dimensions 91x71x55,6 mm.

Input voltage 100-240V AC,
Input frequency 50-60Hz,
Output voltage 24V DC,
Max output current 3,8A,
Dimensions 91x71x55,6 mm.

Input voltage 100-240V AC,
Input frequency 50-60Hz,
Output voltage 24V DC,
Max output current 5A,
Dimensions 121x50x118,7 mm.

Input voltage 100-240V AC,
Input frequency 50-60Hz,
Output voltage 24V DC,
Max output current 10A,
Dimensions 121x85x118,5 mm.

Input voltage 100-240V AC,
Input frequency 50-60Hz,
Output voltage 24V DC,
Max output current 20A,
Dimensions 121x85x118,5 mm.