VKN1
Trench heating fan assisted
Product features:
- new generation of fan assisted trench heaters
- no compromised thermal outputs
- health and safety met – any servicing current only 24V
- highly energy efficient heat exchanger
- product compliant to PN-EN 16430
Basic sizes:
Trench height: 65, 90 mm
Trench width: 140, 170 mm
Trench length (Lk): 950÷2000 mm
Non-standard (NS) length heaters can be made on order.
VKN1 fan assisted trench heater, thanks to its small sizes, would fit any limited ceiling/raised floor space. That feature could be specifically useful if you consider trench heaters for retrofitted or thermo-modernised buildings, specifically to the spaces where installing trench heating because of the space limit where previously not possible.
- The shallowest and the narrowest trench heaters from the entire range
- Highly energy efficient heat exchanger
- Low noise and energy efficient EC Fan Motors
- Adjustment for casing mounts
- Dedicated control system
- Custom/nonstandard trench heater design
We have achieved more thermal output and shorter temperature adjustment times thanks to using more economical fan motors. Trench heating system savings on the running costs up to 20% thanks to small thermal inertia and electronic temperature adjustment can be easily achieved.
VKN 1 fan assisted trench heaters are a perfect match for any low fluid’s temperature systems, especially in higher humidity mild environment. The fact the trench heaters distribute the warm air evenly across the room could be considered as their benefit.
Equipment
Standard equipment:
- tray (cover) made of hot-dip zinc-magnesium coated steel, RAL 9005 black powder coated,
- highly efficient heating part – copper-aluminium heat exchanger, Black powder coat with bleeding valve,
- modern fan with silent and efficient 24V DC motor
- cover for connector chamber,
- fan cover, so called grille, with airstream nozzles,
- threaded ½" half-union connectors,
- assembly struts,
- fastening anchors,
- tray position adjustment system.
Additional equipment:
- tray (cover) powder coated in any of the RAL palette colours,
- Type L or F natural or anodized aluminium decorative flame,
- aesthetic grille,
- assembly cover for protection of heater during transport, handling and installation.
- assembly kit for raised floor,
- bimetal temperature sensor,
- adjustable edge of heater tray,
- heater tray protective film,
- foil sleeve for heat exchanger.
Accurate thermal outputs, temperature correction multipliers and hydraulic flows and selection characteristics that concerns VKN1
fan assisted trench heaters are included in VKN1 Fan Assisted Trench Heaters technical catalogue.
The following basic sizes of specific trench heating units have been presented below
Dimensions
-
Trench height 65 mm
VKN1-6,5/14/Lk (L/P)
DIMENSIONS UNIT [mm] Trench height 65 Trench width 140 Grille width (Bk) 164 Trench length (Lk) 950÷2000 mm CONNECTIONS TYPE Connectors GW ½" Connection side Left (L) standard,
Right (R) optionalACCESSORIES TYPE Grille H=18 mm Roll-up/linea /modular Frames L or F Additional accessories Assembly cover, assembly set for raised floor, bimetal temperature sensor, adjustable edge 
VKN1-6,5/17/Lk (L/P)
DIMENSIONS UNIT [mm] Trench height 65 Trench width 170 Grille width (Bk) 194 Trench length (Lk) 950÷2000 mm CONNECTIONS TYPE Connectors ½" TH half-union Connection side Left (L) standard,
Right (R) optionalACCESSORIES TYPE Grille H=18 mm Roll-up/linear/modular Frames L or F Additional accessories Assembly cover, assembly set for raised floor, bimetal temperature sensor, adjustable edge 
-
Trench height 90 mm
VKN1-9/14/Lk (L/P)
DIMENSIONS UNIT [mm] Trench height 90 Trench width 140 Grille width (Bk) 164 Trench length (Lk) 950÷2000 mm CONNECTIONS TYPE Connectors ½” TH half-union Connection side Left (L) standard,
Right (R) optionalACCESSORIES TYPE Grille H=18 mm Roll-up / linear / modular Frames L or F Additional accessories Assembly cover, assembly set for raised floor, bimetal temperature sensor, adjustable edge 
VKN1-9/17/Lk (L/P)
DIMENSIONS UNIT [mm] Trench height 90 Trench width 170 Grille width (Bk) 194 Trench length (L) 950÷2000 mm CONNECTIONS TYPE Connectors ½" TH half-union Connection side Left (L) standard,
Right (R) optionalACCESSORIES TYPE Grille H=18 mm Roll-up / linear / modular Frames L or F Additional accessories Assembly cover, assembly set for raised floor, bimetal temperature sensor, adjustable edge 
Declared user characteristics
- Maximum permissible operating pressure: 1.0 MPa.
- Test pressure 1,3 MPa.
- Maximum hydraulic pressure: 1.69 MPa.
- Maximum operating temperature: 110°C
Specifying Verano units is simple and straightforward and can be conducted using the guidance included in the technical catalogue (p.40-43) or from the separate file available to download below.
DOWNLOAD SELECTION AND INSTALLATION QUICK GUIDE
For placing an order please contact our London helpline, or check out if you can place purchase order via any UK/Ireland based merchants or distributors listed on our websites.
For your reference please find below a brief explanation of Verano products ordering codes.
All ordered units are not coming with control sets and valves (all controls and valves are optional). Any of those items are the subject of the separate order/position on your purchase order document. If you have any concerns regarding this, please contact your merchant or our office prior placing an order. Verano nor its representatives will not take any responsibility for any miss-completed orders.