CVK2 Two-pipe in floor Climaconvector

CVK2 are trench heating and cooling units installed in the floor layer. They provide the appropriate temperature and optimal microclimate in both summer and winter. CVK2 have one circuit used either by the heating or chilled water system. CVK2 are ideal for low-temperature heating and cooling thanks to their high-efficiency exchanger.
 
CVK are equipped with a drip tray that allows condensate to be drained by gravity or with a condensate pump. Warm or cold air supplied by the unit is sent directly to the glazed partition that creates a barrier to reduce heat loss in winter and heat gain in summer, and provides a suitable climate in the room. Heating and cooling capacities have been tested in accordance with EN 16430.

STANDARD EQUIPMENT:
• casing made of galvanized steel sheet in standard black RAL 9005 colour,
• highly efficient cooper-aluminium heat exchanger with air vent,
• modern fan with silent and efficient 24V DC motor,
• connection space cover,
• water connection: 3/4″ female threat,
• trench struts,
• condensate tray,
• fixing anchors,
• leveling legs.

ADDITIONAL EQUIPMENT:
• casing powder coated in any RAL colour,
• condensate pump,
• decorative frame: L or F type made of natural or anodized aluminium,
• decorative grille made of natural or anodized aluminium or stainless steel,
• fibreboard cover,
• raised floor support system,
• air filter (requires increasing the height of the casing by 10mm),
• control system.

Operating pressure: 1,0 MPa.
Test pressure: 1,3 MPa.
Maximum hydraulic pressure: 1,69 MPa.
Minimum operating pressure: 6°C
Maximum operating temperature: 110°C