SVKN1 Fan assisted pedestal unit

Low-temperature fan assisted pedestal units type SVKN1 have very high heating output and in the same time small size. They work everywhere where trench heater cannot be used. They fit perfectly into any room and the possibility of choosing a grille and any RAL colour makes them universal. They are equipped with a very quiet fan 24 V DC EC.

STANDARD EQUIPMENT:
• Casing made of galvanized steel, powder coated in white RAL 9003 or black RAL 9005
• Linear grille painted in the same colour as the heater
• Copper-aluminium heat exchanger with air vent
• Modern fan with silent and efficient 24V DC EC motor
• Water connection with ½’’ female thread
• Assembly kit
• Fan cover with airflow baffle
• Heater bracket/leg, 100mm high.

ADDITIONAL EQUIPMENT:
• Casing painted in any RAL colour
• Custom top grille type: linear or roll-up, natural or anodized aluminium
• Anti dust filter (causes an output decrease by approx 10%)
• Valves and control system (actuator, controller, power supply).

• Standard heating output [W] compliant to EN16430-1:2015-02.
• Control voltages for the respective modes of operation: Min – 2 V, Med – 4 V, Max – 6 V, Boost – 10 V.
• Min, Med, Max fan speeds are for continuous operation, the Boost mode is for speed heating.
• Sound power level according to ISO-3745 standard, sound pressure level measured at distance of 2 m to the heater, in a 100 m3 volume room. Reverb time – 0,5 s, room damping – 8 dB(A).
• Maximum permissible operating pressure: operating pressure: 1,0 MPa.
• Test pressure: 1,3 MPa.
• Maximum hydraulic pressure: 1,69 MPa.
• Maximum operating temperature: 110°C