VKN1 Trench heating fan assisted

The VKN1 fan-assisted trench heater, thanks to its small size, will fit into any limited ceiling/raised floor space. This feature can be particularly useful when considering trench heaters for retrofitted or thermo-modernized buildings, especially for rooms where the installation of trench heating was previously impossible due to space limitations.
• The shallowest and narrowest trench heaters in the range
• Highly energy-efficient heat exchanger
• Low noise level and energy-efficient EC fan motors
• Dedicated control system
• Customized trench heater design

We achieved higher heat output and shorter temperature control times by using more economical fan motors. With low thermal inertia and electronic temperature control, savings of up to 20% in the operating cost of the trench heating system can be easily achieved.

VKN 1 fan-assisted trench heaters are ideal for any low-temperature system, especially in environments with high humidity. The fact that trench heaters distribute warm air evenly throughout the room can be considered as an advantage.

STANDARD EQUIPMENT:
• casing made of galvanized steel sheet in standard black RAL 9005 colour,
• highly efficient cooper-aluminium heat exchanger with air vent,
• modern fan with silent and efficient 24V DC motor,
• connection space cover,
• water connection: 1/2″ female threat,
• trench struts,
• fixing anchors,
• leveling legs.

ADDITIONAL EQUIPMENT:
• tray (cover) powder coated in any of the RAL colour,
• decorative frame: L or F type made of natural or anodized aluminium,
• decorative grille made of natural or anodized aluminium, wood or stainless steel,
• fibreboard cover,
• raised floor support system,
• air filter (requires increasing the height of the casing by 10mm),
• control system.

Maximum permissible operating pressure: 1,0 MPa.
Test pressure 1,3 MPa.
Maximum hydraulic pressure: 1,69 MPa.
Maximum operating temperature: 110°C