NCVK2 Fan assisted wall-mounted heating and cooling unit

Two pipe fan assisted wall-mounted heating and cooling unit, one device with two features. Use of modern controls, ensures adequate thermal comfort in summer and winter. Modern design and a selection of casings, grilles and RAL colours make it fit perfectly into the interior.
Thanks to the use of a quiet and efficient fan with a 24V DC EC motor, it allows you to reach the required temperature faster than natural convection. It is ideal for low-temperature systems equipped with heat pumps or condensing boilers. NCVK2 are equipped with a drip tray that allows condensate to be drained by gravity or with a condensate pump.
There are two versions of the device to choose from: basic (without valves and control system) and plug&play (valves, actuator, power module and built-in regulator are factory wired).
 

STANDARD EQUIPMENT:
• Casing made of galvanized steel, powder coated in white RAL 9003,
• Copper-aluminium heat exchanger with air vent,
• Front grille: oval,
• Top grille: linear aluminium, powder coated in white RAL 9003,
• Modern fan with silent and efficient 24V DC EC motor,
• Fan cover with airflow baffle,
• Water connection with ¾” female thread,
• Assembly kit,
• Condensate drain pan.
ADDITIONAL EQUIPMENT:
• Casing painted in any RAL colour,
• Custom front grille type: honeycomb,
• Custom top grille type: linear or roll-up, natural or anodized aluminium,
• Condensate pump,
• Valves and control system (actuator, controller, power supply),
• Anti dust filter (causes an output decrease by approx 10%).

PLUG&PLAY VERSION
STANDARD EQUIPMENT:
• Casing made of galvanized steel, powder coated in white RAL 9003,
• Copper-aluminium heat exchanger with air vent,
• Front grille: oval,
• Top grille: linear aluminium, powder coated in white RAL 9003,
• Modern fan with silent and efficient 24V DC EC motor,
• Fan cover with airflow baffle,
• Water connection with ½” female thread,
• Assembly kit,
• Condensate drain pan,
• Valves and control system (actuator, built-in controller VERANO-1*, power module) – factory wired ,
• Power cable with F-type plug.
ADDITIONAL EQUIPMENT:
• Casing painted in any RAL colour,
• Custom front grille type: honeycomb,
• Custom top grille type: linear or roll-up, natural or anodized aluminium,
• Condensate pump,
• Anti dust filter (causes an output decrease by approx 10%).

Maximum permissible operating pressure: 1,0 MPa.
Test pressure: 1,3 MPa.
Maximum hydraulic pressure: 1,69 MPa.
Maximum operating temperature: 110°C